Gas Detection Sensor

The Troman Combustible Gas Detector provides a resettable point sensing solution which is ideal for detecting gas leaks within hazardous zones in vehicles such as CNG, LNG, and Propane. The detector is fitted with a temperature-compensating metal oxide sensing element, which provides alarm outputs at two gas concentrations.

Troman Combustible Gas Detector Enhances Vehicle Safety

Depending on the Troman controller used, up to four or eight gas detectors can be used on a single channel. An end-of-line device is installed at the end of each channel to allow continuous monitoring.

The best mounting locations include the engine compartment, the fuel fill port, fuel cylinder exhaust port. A trace alarm typically provides the driver with a visual and audible warning, which resets if the gas concentration reduces. If a significant alarm is reached, the alarm signal is usually latched, and vehicle emergency protocols are initiated. This allows the vehicle to be stopped and passengers evacuated safely.

Hydrogen Gas Detector

The Troman Hydrogen Gas Detector provides a resettable point sensing, which is ideal for detecting gas leaks within hazardous zones in hydrogen fuel cell vehicles. The detector is fitted with a temperature-compensating metal oxide sensing element, which provides alarm outputs at two gas concentrations.

Troman Hydrogen Gas Detector Enhances FCEV Safety

Depending on the Troman controller used, up to four or eight gas detectors can be used on a single channel. An and of line device is installed at the end of each channel to allow continuous monitoring.

The best mounting locations include the engine compartment, the fuel fill port, fuel cylinder exhaust port. A trace alarm typically provides the driver with a visual and audible warning, which resets if the gas concentration reduces. If a significant alarm is reached, the alarm signal is usually latched, and vehicle emergency protocols are initiated. This allows the vehicle to be stopped and passengers evacuated safely.